YUKA miniRepair guide
YUKA mini front-wheel replacement
Replace the front caster assembly through its T20 mounting plate, then check retention, rolling and swivel movement.
Power off, remove the security key and wear protective gloves before starting.
Before you start
Preparation
- For the YUKA mini hardware shown in the January 2025 SOP. Match the actual caster and its mounting arrangement.
- Keep the mower off with its security key removed during mechanical work.
- Access the front-wheel mounting plates from underneath; top-cover, board and cutting-disc removal are not required.
Tools & supplies
- T20 driver
- Padded stable support and protective gloves
Source & repair notes
Page references use physical PDF pages.
This procedure covers the January 2025 YUKA mini, not mini Vision or mini 2. The SOP supplies no per-fastener tightening torque.
Replacement matching and retention/function checks are editorial additions to the documented removal and assembly actions.